BSS BLU-50 4x4 Signal Processor with BLU link
Item#BSSBLU50-M-EU
The BLU-50 is a half-rack width processor that offers a fixed configuration of four inputs and four outputs, configurable signal processing, logic processing and BLU link. The device can be powered with the included 12VDC power supply but can accept 12-48VDC via a terminal block connector. The BLU-50 can also be powered with PoE+ via the Ethernet port, allowing the device to be powered, configured, controlled and monitored using a single Cat 5e cable.
The analog inputs of the BLU-50 provide software configurable gain in 6dB steps up to +48dB per channel and software selectable Phantom Power per channel. Phantom Power, Signal Present and Clip information per channel is easily accessible, without the requirement for a PC, from clear front panel LED indication.
Specifications
| Chassis | Half rack (single space, half-width) |
| Custom I/O (card based) | no |
| Analog Inputs | 4 |
| Digital Inputs | 0 |
| AEC Inputs | 0 |
| Analog Outputs | 4 |
| Digital Outputs | 0 |
| Telephone Connection | 0 |
| Max Inputs/Outputs | fixed |
| Config | Software |
| LCD Display | no |
| Logic Processing |  |
| RS-232 | |
| GPIO | |
| Signal Processing (MHz) | 400 |
| Cobranet | no |
| SWL Digital Audio Bus | 48 |
| AVB | no |
| Dante | no |